Installation of floors:
Preparation of the installation work
The floor board packets have to be stored in a dry and warm indoor space protected from rain and sunlight. Mounting on the room temperature and humidity should be normal, temperature 20 C °and humidity under 50 %. Make sure that the joists are flat prior to installation. Maxium distance of joists is 600 mm.
Install the large surfaces of the same production batch.
Make sure that the lighting is good during the installation.
Attach the floorboard at the base of protruding tongue on a slat 45 degree angle. First floorboard is attached to the female side of the wall.
When you installing floor plank, leave 10 mm margin between floor and wall.
DO NOT INSTALL THE INCORRECT PRODUCT. INSTALLED PRODUCT IS A AUTHORIZED PRODUCT.