1047APE36

Base moulding 12x42x3600

Ornament, M1 classified

Product category
Base mouldings
Material
Pine
Treatment
Painted
Color
White
Thickness × Width
12 mm × 42 mm
Length
3600 mm
EAN
6420611099318

Intended use

For dry indoor spaces. Sauna and PVC products also for the humid areas in your home.

Preparation of the Installation Work

  • Products should be stored indoors in a dry place, protected from rain and sunlight.
  • Before installation, stack the products loosely and let them sit for approximately one week to allow their temperature and humidity become level with the surrounding conditions.
  • The room temperature and humidity at the installation site should be normal (temperature approx. 20 °C and humidity below 50%).
  • We recommend using products from the same production batch to avoid color differences.

DO NOT INSTALL A DEFECTIVE PRODUCT.
ONCE INSTALLED, A PRODUCT IS CONSIDERED APPROVED.

Installing base mouldings

  • When securing mouldings or strips to a stone wall, use a mounting adhesive or wall plugs.
  • Do not pierce the vapor barrier.
  • When using screws to secure the product, you will need to pre-perforate the product to prevent it from cracking.
  • Fasten the product every 60 cm.
  • Press the product firmly against the mounting surface before securing it.