Cornice strip 15x18x3600

M1 classified, shadow moulding

Product category

Cornice strips

Material

Pine

Treatment

Painted

Color

White

Thickness × Width

15 mm × 18 mm

Length

3600 mm

EAN

6420611097734

Intended use

For dry indoor spaces. Sauna and PVC products also for the humid areas in your home.

Preparation of the installation work

• Products should be stored indoors in a dry place, protected from rain and sunlight.
• Before installation, stack the products loosely and let them sit for approximately one week to allow their temperature and humidity become level with the surrounding conditions.
• The room temperature and humidity at the installation site should be normal (temperature approx. 20 °C and humidity below 50%).
• We recommend using products from the same production batch to avoid color differences

Installing cornice strips

• Make sure that the lighting is sufficient during installation.
• Secure the mouldings or strips using a finish nailer.
• When securing mouldings or strips to a stone wall, use a mounting adhesive or wall plugs.
• Do not pierce the vapor barrier.
• When using screws to secure the product, you will need to pre-perforate the product to prevent it from cracking.
• Fasten the product every 60 cm.
• Press the product firmly against the mounting surface before securing it.

DO NOT INSTALL A DEFECTIVE PRODUCT. ONCE INSTALLED, A PRODUCT IS CONSIDERED APPROVED.

See also

Retailers

Find your nearest retailer