4080PTE24

Edge strip 24x42/15x2400

Product category
Edge strips, Damp areas
Material
Alder
Treatment
Planed
Color
Thickness × Width
24 mm × 42 mm
Length
2400 mm
EAN
6438202007376

Intended use

For dry indoor spaces. Sauna and PVC products also for the humid areas in your home.

Preparation of the installation work

  • Products should be stored indoors in a dry place, protected from rain and sunlight.
  • Before installation, stack the products loosely and let them sit for approximately one week to allow their temperature and humidity become level with the surrounding conditions.
  • The room temperature and humidity at the installation site should be normal (temperature approx. 20 °C and humidity below 50%).
  • We recommend using products from the same production batch to avoid color differences.

Installing edge strips

  • Make sure that the lighting is sufficient during installation.
  • Secure the mouldings or strips using a finish nailer.
  • When securing mouldings or strips to a stone wall, use a mounting adhesive or wall plugs.
  • Do not pierce the vapor barrier.
  • When using screws to secure the product, you will need to pre-perforate the product to prevent it from cracking.
  • Fasten the product every 60 cm.
  • Press the product firmly against the mounting surface before securing it.

DO NOT INSTALL A DEFECTIVE PRODUCT. ONCE INSTALLED, A PRODUCT IS CONSIDERED APPROVED.